|
| Form Factor |
|
| Dimensions |
- 9.6" x 9.6", (24.4cm x 24.4 cm)
|
|
| CPU |
-
Intel® Xeon® processor E3-1200 v3 (supports VHD via E3-1285 or E3-1285L) and 4th Gen Core i3, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) w/ RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Network Controllers |
- Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| VGA |
- BMC integrated Aspeed AST2400
|
| Serial ATA |
|
| LAN |
- 2x Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 4x USB 3.0 ports (2 rear, 1 Type-A, 1 via header)
- 6x USB 2.0 ports (2 rear, 4 via header)
|
| VGA |
|
| Serial Port / Header |
- 2x COM ports (1 rear, 1 header)
|
| DOM |
- SATA DOM (Disk on Module) power connector support
|
| TPM |
|
|
|
|
| PCI-Express |
- 1x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 3.0 x8 slot
- 1x PCI-E 2.0 x4 (in x8) slot
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
| Software |
- IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| Voltage |
- Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
