I-tec MySafe USB 3.0 / USB-C 3.1 Gen. 2, External case

i-tec MySafe USB-C/USB-A 2x M.2 SATA Drive presents an external frame for installation of maximum two M.2 B-Key SATA Based SSD disks; you can connect this frame to your PC, notebook, or tablet by means of USB-C, or USB 3.0 interface (the connecting cables USB-C ? USB-C as well as USB-C ? USB 3.0 included). The USB connections USB offers very fast and easy data transfer ? up to Gbps via USB-C, and up to 5 Gbps via USB 3.0. The USB-C interface is compatible with Thunderbolt 3. Rigid aluminium design provides an excellent heat removal as well as perfect protection for the M.2 disks.

One of the greatest advantages of this frame is the support of RAID, which will allow either to set high level of your data protection, or the very high data writing speed, eventually to create huge hard disk unit (consisting of two hard disks. The following RAID possibilities (if two hard disks are used) are available:

RAID 0: very high data writing speed (the frame is able to perform interlaced writing to both hard disks)
RAID 1: high data protection level (the frame perform mirroring (it writes the identical data to both hard disks; in case of failure of one of the hard disk, neither the data nor the access to the data will be lost)
JBOD/Standalone: within the system, the frame is seen as two standalone ones
JBOD/Spanning: within the system, the frame is seen as only one hard disk (with the capacity equal sum of capacities of both hard disks)
M.2 installation is very simple, it takes you just few minutes

- An external USB-C frame, suitable for all M.2 B-Key SATA Based SSD hard disks
- Rigid aluminium design provides an excellent heat removal as well as perfect protection for the hard disk
- Connectivity USB-C 3.1 Gen. 2, USB 3.0 compatible (cables USB-C - USB-C as well as USB-C - USB 3.0 included)
- Transfer rate up to 10 Gbps (USB-C 3.1 Gen.2), or 5 Gbps (USB 3.0)
- Plug & Play