Suitable for simultaneously connecting 4 HDMI devices to your TV. Enjoy the latest Ultra HD content and watch Netflix or a Blu-ray movie in 4K, while maintaining ultimate contrast and beautiful colours. Suitable for the latest Ultra HD 4K60 resolution (3840 x 2160 / 60Hz), High Dynamic Range (HDR), Deep Color and 4:4:4 chroma colours. Supports Dolby Atmos and DTS:X and all other common audio formats. Switches automatically and/or with remote control. Includes built-in repeater and equalizer for correcting any signal loss. Supports HDCP 2.2 for playing protected 4K Ultra HD content.
Connect 4 devices with just a single cable to the HDMI input of a TV or projector.
The Connect 620 UHD 2.0 enables you to connect up to 4 devices to your TV with one cable.
The UHD 2.0 range is suitable for connections with the very latest Ultra HD equipment, provided these are equipped with both HDMI 2.0 and HDCP 2.2 security.
HDMI 2.0 The main improvement of HDMI 2.0 in comparison to HDMI 1.4 is a higher bandwidth (higher data rate), enabling 4K with higher frame rates and HDR.
The amount of data that can be sent is increased from 10.2 Gbps to 18 Gbps. This makes it possible to display 4K using a frame rate of 50-60 frames per second, 4:4:4 and HDR. HDMI 2.0 also offers support for a larger colour range (12-bit instead of 8-bit) and Dual View.
HDCP 2.2 4K Ultra HD content is increasingly becoming the standard. Due to this development in digital video technology, the current copy protection, HDCP, has evolved into HDCP 2.2. To play the latest Ultra HD content (4K films or broadcasts) in the best possible image quality, all your AV equipment in the same chain must support this HDCP 2.2 security.
So, this does not only apply to the source and your TV. If, for example, you route your HDMI signal via an HDMI switch, splitter, AV receiver or soundbar, they must all be HDCP 2.2 compliant as well. If that is not the case, the material will not be displayed in the highest possible resolution (1080p instead of 4K) + the corresponding image quality OR will sometimes not be displayed at all.
Well prepared Marmitek UHD 2.0 switch gear enables you to prevent these (future) problems and to make the most of your (existing) equipment. This range is HDMI 2.0/HDCP 2.2 compliant and therefore the best solution for connecting your HDMI devices and TVs.
Features
Product colour
Grey
HDCP
Yes
Maximum refresh rate
60 Hz
Supported graphics resolutions
3860 x 2160
Supported video modes
2160p
Bandwidth
18 Gbit/s
LED indicators
Yes
Bandwidth
600 MHz
Maximum resolution
3840 x 2160 pixels
3D
Yes
Colour depth
32 bit
Dolby technologies
DTS-HD Master Audio,DTS:X,Dolby Atmos,Dolby Digital,Dolby Digital AC3,Dolby TrueHD
Questions or comments about this product
No recent questions or comments.
To add questions or comments to this product's miniforum you must log in first. Log in or Sign up